As the KNX or Modbus protocols are widely used in building automation and security management systems, the RISCO KNX/Modbus module is an ideal solution for diverse applications, including commercial and industrial building automation, security management systems, or residential home automation using these protocols. The RISCO KNX/Modbus supports up to 2,500 points (EIB/KNX Group Object or Modbus registers readable/writable from a master Modbus IP). It can be set to operate as Modbus IP secondary mode or as EIB/KNX IP mode.
Note: It is recommended that certified integrators, who are well-versed in KNX and Modbus technology, handle the installation of the KNX/Modbus module.
As the KNX or Modbus protocols are widely used in building automation and security management systems, the RISCO KNX/Modbus module is an ideal solution for diverse applications, including commercial and industrial building automation, security management systems, or residential home automation using these protocols. The RISCO KNX/Modbus supports up to 2,500 points (EIB/KNX Group Object or Modbus registers readable/writable from a master Modbus IP). It can be set to operate as Modbus IP secondary mode or as EIB/KNX IP mode.
Note: It is recommended that certified integrators, who are well-versed in KNX and Modbus technology, handle the installation of the KNX/Modbus module.
Key Features
Integrates with building automation systems
Control the panel via a management system
Create custom alarm scenarios
Use detectors as triggers for other systems
Supports remote software upgrade
Selectable Modbus or KNX
Integration with Building Automation Systems
The KNX/Modbus module facilitates the control of the alarm panel through a Management System using the KNX/Modbus protocol. This includes commands like partial or full set/unset, triggering outputs, and bypassing zones. In ModBus IP secondary mode, the KNX/Modbus module can accept up to 3 simultaneous IP connections from 3 different ModBus IP masters
Utilising Detectors as Triggers
Employ the alarm system’s detectors as triggers for other building systems, such as HVAC, lighting, or blinds, enhancing overall efficiency and automation.
Downloads
Download technical manuals and further information for the KNX/Modbus Module
5IN2673 C RISCO KNX/Modbus Module Instructions EN
Models available
Technical specifications
KNX/Modbus Module RP512GKNX00A
Hardware
Mounting
DIN rail (EN 60715), panel or wall
Material
PC / ABS self-extinguishing
Color
Light gray
Support
DIN rail or wall hook
Max Dimensions
w. 71.3mm, h. 90.5mm, d. 62mm
Power Supply
Input voltage
90 - 264VAC
Input Voltage Frequency
47-63Hz
Input Current
0.3A Max
Output Voltage
+ 5VDC
Output Current
2A
Rated Output Power
10W
Output Cable
1500mm Micro USB B 5 Pin
Parameters
KNX/Modbus Module default IP address
172.16.137.1
KNX/Modbus Module default Subnet Mask
255.255.255.0
KNX/Modbus Module default Gateway IP address
172.16.137.254
Web Config IP Address
http://172.16.137.1
Compatibility
LightSYS+, LightSYS Air, Agility, Wicomm Pro and ProSYS Plus
